Installation guides
Cleaner Water In Minutes.
Choose your Afina below for step-by-step setup. No tools, no plumber.
Install Your Filtered Shower Head
Everything you need comes in the box: the showerhead with its filter pre-installed, a quick-install wrench and plumber’s tape. If your current showerhead unscrews, Afina should screw on.
-
Step 1
Remove your old showerhead
Turn it counterclockwise to unscrew it from the shower arm.
-
Step 2
Screw on your Afina
Wrap the included plumber’s tape around the arm threads 2–3 times, then twist Afina on by hand until secure.
-
Step 3
Turn on and enjoy
Run the water for a few seconds and enjoy your first filtered shower.
Replace the filter every 60 days
Install Your Handheld Shower Head
Everything you need comes in the box: the handheld with its filter pre-installed, a quick-install wrench and plumber’s tape. If your current showerhead unscrews, Afina should screw on.
-
Step 1
Remove your old showerhead
Unscrew your current showerhead from the shower arm.
-
Step 2
Screw on your Afina
Wrap the included plumber’s tape around the arm threads 2–3 times, then twist Afina into place by hand until secure.
-
Step 3
Turn on and enjoy
Run the water for a few seconds and enjoy cleaner water and stronger pressure from your first shower.
Replace the filter every 60 days
Install Your Faucet Filter
Fits standard ½-inch faucet threads. Faucet adapters and one pre-installed cartridge come in the box.
-
Step 1
Remove the aerator
Unscrew the aerator from the tip of your faucet.
-
Step 2
Twist on Afina
Hand-tighten the Afina Faucet Filter onto the faucet. Use the included adapter if your faucet has a hidden aerator.
-
Step 3
Splash & wash
Switch to filtered mode to wash your face, or rinse mode for everyday sink use.
Replace the cartridge every 2 months
Install Your Shower Filter
The Afina Shower Filter fits between your shower arm and the showerhead you already own: fixed, rain or handheld. Plumber’s tape, an install kit and a wrench are included.
-
Step 1
Remove
Unscrew your old showerhead from the shower arm.
-
Step 2
Attach
Wrap the arm threads with plumber’s tape, screw the Afina filter onto the arm, then screw your showerhead onto the filter.
-
Step 3
Enjoy
Turn on the water and enjoy cleaner, softer-feeling showers.
Replace the filter every 2–3 months
Set Up Your Afina Pour Pitcher
No tools, no plumber. Just press in a filter, fill and pour.
-
Step 1
Press in the filter
Rinse the filter, then press it firmly into the reservoir until it’s fully seated.
-
Step 2
Fill with cold tap water
Fill the top reservoir and let it filter through. Discard the first 2–3 pitchers from a new filter.
-
Step 3
Pour & enjoy
Crisp, cleaner-tasting water, ready in the fridge whenever you are.
Unboxing and setting up the Afina Pour
Replace the filter every 120 gallons
Need help? Email support@afina.com or visit our Contact Page.